Home‎ > ‎

20190126 - Hole Punch

posted Jan 25, 2019, 5:05 PM by Onno Benschop
If you need to create a D-shaped hole in a chassis for a connector, here are some suggestions:
  • Drill a hole that's smaller and use a half-round file to make the hole the right size.
  • Use a dremel tool, but be prepared to bring band-aids and disinfectant.
  • RS-Components sells Punch and Die combinations
  • Greenlee makes hole punches and they are available via Amazon.
#diy #building
Comments