Home‎ > ‎

20201031 - Antenna Designs

posted Oct 30, 2020, 5:58 PM by Onno Benschop   [ updated Oct 30, 2020, 6:04 PM ]
 Eric VK6BJW shares with us an antenna design for satellite work after discussion on making portable antennas:
Ben VK6NCB advises that if you're using copper tape to make a trace - as an antenna element for example - you can join two lengths of tape together by putting a dot of solder on the seam and briefly holding a soldering iron to the dot.

Ben also introduced us to the back packer version of the Arrow antenna (his model is the 146/437-10-WBP) which packs up to 10cm x 50cm. Here are all the Arrow II antennas:
Arrow Satellite Antenna
Ben VK6NCB's antenna

#vk6bjw #vk6ncb #yagi #portable #satellite